AccuracyRTD and Types J, K, T, E, N: ±0.1% of span ;Types B, R, S: ±0.2% of span. ; Thermistor 0.4 of span ±0.7⁰F (0.5⁰c) ;Span equals: 1000⁰F (540⁰C) min.
Resolution0.1⁰; 1⁰ above 999.9⁰ and below -99.9⁰
Control Input RTDYes
Control Input ThermocoupleYes
Control Input ThermistorYes
Control Output 1Power receptacle rated for 230 VAC 10 A max
Control Output 2Relay: SPDT rated from 24VAC 1 A max; resistive
Alarm OutputYes
Communication OutputUSB
Data LoggingNo
Display TypeOLCD
Height (in)3.75
Width (in)8
Depth (in)9
Height (mm)95.25
Width (mm)203.2
Depth (mm)228.6
Power (VAC)230
DescriptionTC-9500 Multiparameter Temperature Controller with USB Output, 230V
Warranty1 year
Key Features
Advanced design allows for quicker and more reliable results
Improved display with easy-to-use interface
Effective 10/1/2014 this product was rebranded from Oakton to Digi-Sense
Heater output is a universal IEC 60320 receptacle. Customer will need an adaptor between the IEC receptacle and heat load for their indiviual country
1 year warranty
More About this Item
The Digi-Sense temperature controllers can be used for a wide variety of applications. Provides excellent control accuracy and power capabilities, making them ideal for pilot process plants, R & D labs, or for OEM requirements.
Product FeaturesAccepts eight thermocouple types with miniconnectors.General features—Rear panel output receptacle for direct plug-in of heaters and other resistive devices. Field calibrations help to improve system accuracy by entering the offset value to correct for individual probe error. Simultaneously view both the measured and set point on the two-line alphanumeric display. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). Front panel indicates output and alarm conditions. Multiple control modes from simple On/Off control to sophisticated autotuning PID control.
Safety features—Output power to load device is automatically shut down in the event of a broken sensor or control loop break. Overtemp feature protection shuts down the system if the user- settable over-temperature or timer is exceeded. Outlet power receptacle is fused separately from the controller for added safety. Audible and visual out-of-range alarms are also included.
The TC-9500 Multiparameter controller accept 8 thermocouple types with mini-connectors, thermistor probes with 1/4" phono plugs, RTD probes with standard 3-pin ANSI connectors, or Oakton®/Digi-Sense® RTD probe connector.
The Temp-9500 also features data logging, ramp-and-soak / ramp-rate profiling for more complicated processes, USB computer interface, alarm relay, and free software that features real-time graphing.
Our specialists are here to help you find the best product or part available for your application. Call or Email us and we will make sure you get the right product or part for the job.